|
Product Details:
Payment & Shipping Terms:
|
| Size:: | 1.5" X 1" | Capacity:: | 10.8-25.2m3/h |
|---|---|---|---|
| Head:: | 7-52m | Speed:: | 1400-3400rpm |
| NPSHr:: | 2-4m | Eff.:: | 35% |
| Power:: | Max.15kw | Handling Solids:: | 14mm |
| Materials:: | R08, R26, R55, S02, S12, S21, S31, S42 Etc | Seal Type:: | Expeller Seal, Packing Seal, Mechanical Seal, Double Mechanical |
| Shaft Position From The Horizontal:: | Rubber Slurry Pump | Warranty:: | One Year |
| Application:: | Mining,metallurgy, Power Plants, Sewage Water Treatment, Dredging,as Well As Petroleum Industry. | Pump Type: | Horizontal Rubber Slurry Pump |
| Model: | 1.5/1B-AHR Slurry Pump | Impeller Type: | Open Impeller Slurry Pump |
Tobee® 1.5/1B-AHR Open Impeller Rubber Slurry Pumps are horizontal, cantilevered centrifugal slurry pump, suitable for transporting abrasive or corrosive slurry. The rubber lined slurry pumps typically used in process plant transfers, corrosive and caustic wet waste, recycling-washing plants, minerals processing, mineral recovery and chemical process plant.
Specification:
Size: 1.5" x 1"
Capacity: 10.8-25.2m3/h
Head: 7-52m
Speed: 1400-3400rpm
NPSHr: 2-4m
Eff.: 35%
Power: Max.15kw
Handling solids: 14mm
Materials: R08, R26, R55, S02, S12, S21, S31, S42 etc
Product Features:
1.Cantilever, horizontal centrifugal rubber lined slurry pump
2. Wet end –resistance and corrosive resistance rubber lined wear parts
3. maximum working pressure is 3.6Mpa.
4.Expeller seal, mechanical seal and packing seal are available.
5. The discharge branch can be positioned at interval of 45 degrees by request and oriented to any eight positions to suit installations and applications.
6.To adapt to convey heavy abrasion, high concentration dredge, slurry pump's body is used double-shell construction, in other words, being made of inside lining and outside casing.
Tobee® 1.5/1B-AHR Open Impeller Rubber Slurry Pump Performance Parameters:
| Model |
Max. Power (kw) |
Material |
Clear Water Performance |
Impeller Vane No. |
|||||
| Liner | Impeller |
Capcacity Q (m3/h) |
Head H (m) |
Speed n (rpm) |
Eff. η (%) |
NPSH (m) |
|||
| 1.5/1B-AHR | 15 | Rubber | Rubber | 10.8-25.2 | 7-52 | 1400-3400 | 35 | 2-4 | 3 |
Tobee® 1.5/1B-AHR Open Impeller Rubber Slurry Pump Structural Design:
Tobee® 1.5/1B-AHR Open Impeller Rubber Slurry Pump Sealing Arrangement:
Packing Seal
As one of the most commonly used seals for rotating shafts, the packing seal can come with low-flush or full flush arrangement which uses flushing water to prevent media from escaping the pump housing. This kind of seal is suitable for use under all pumping conditions. In situations where corrosive solids or high temperature might be encountered, Teflon or aramid fiber is used as the packing material for the gland. For high abrasion conditions, a ceramic shaft sleeve is available.
Centrifugal Seal - Expeller
The combination of impeller and expeller creates the pressure needed to seal against leakage. Together with the gland seal or lip seal which is used as the shut-down seal, this type of seal can handle sealing requirements for applications where full-flush gland seal is impractical due to lack of water on the site, or sealing water is allowed to enter inside the pumping chamber to dilute the slurry.
Mechanical Seal
AHR heavy duty slurry pump utilizes a leak-proof mechanical seal design which allows easy installation and replacement. Other types of mechanical seal are among options to suit the slurry pump for various pumping applications.
We also utilize special ceramic and alloys of high strength and hardness on parts that are subjected to friction. Unique design of and seamless fit between the mechanical seal and seal chamber provides excellent resistance to abrasion and shock that ensures its effectiveness under the toughest conditions.
Tobee® 1.5/1B-AHR Open Impeller Rubber Slurry Pump On-site Applications:
| Wet crushers | Ni acid slurry | Minerals concentrate | Oil sands | Coal | Pulp and paper |
| SAG mill discharge | Coarse sand | Heavy media | Mineral sands | Flotation | FGD |
| Ball mill discharge | Coarse tailings | Dredging | Fine tailings | Sugar beets | Waste water |
| Rod mill discharge | Phosphate matrix | Bottom/fly ash, lime grinding | Phosphoric acid | Process chemical | Aluminum oxide |
QA&QC
Reliable and comprehensive quality assurance system ensures the excellent quality of our products. We have got the “International Standard” certification, manufactured according to GB, Department of superscript, and industry standards, we implement a comprehensive quality management during the entire process of production, accordance with the process file processing strictly, and a variety of detection methods etc.
We have met the requirements of GB3216-89 national Class B accuracy, computer test data monitoring of water test pumping station application. There are physical chemistry laboratory, metallographic analysis room in our factory, for testing material properties in different respects.
1. Quality Policy
Advocates quality is the life of enterprise, assiduous, the pursuit of excellence
2. Quality objectives
qualified products rate 99%, factory qualified pass rate: 100%
3. Quality Commitment
1) We will continue to improve the awareness of quality, implementing as GB/T19001-2000 quality assurance model standard, meeting technical requirements stipulated in the contract. We are not only discharge for the supplier host, but also for the quality of spare parts, external assistance products etc.
2) We promise the delivery time stipulated in the contract.
