Tobee® offer the full line of replacement Warman HS1 pump parts from 1.5/1 B-AH pump to 20/18 TU-AH pump in metal, rubber and polyurethane materials, and the Hi-seal wearing spares included slurry pump expeller, slurry pump expeller ring and slurry pump frame plate liner insert.

The HS1 slurry pump spare part is designed with a larger diameter for sealing at high intake pressures to produce a slightly increased centrifugal force thereby a marginally higher head, thereby slurry pump Hi-seal pump spares are able to handle higher inlet pressure that means that centrifugal seal can be used in a wider rang of applications.

For example, when running at a typical 700rpm for an 8/6 pump in a severe duty, there was about a 6kPa improvement in the maximum allowable suction pressure (66kPa rather than 60kPa). With many applications having an SG of about 1.3, this equates to a suction tank being able to have a maximum tank level of about 5.2m with a conventional style expeller instead of 4.7m.

Tobee® supply replacements slurry pump high seal parts numbers as below:

Tobee® High Seal Slurry Pump Spares Reference Photos:

Technical dept.
Hebei Tobee Pump Co.,Limited