Tobee® 1.5/1C-HH High Head Slurry Pumps were designed to produce high heads per stage at high pressures, commonly used for long distance transport lines, the 1.5x1 HH pump can often satisfy application duties with a single pump where others require multiple pumps, which is widely used to transport corrosive and abrasive and high concentration slurries in mining, sand, lead and various other industries including electric utilities, copper, oil shale, agriculture, etc. 1.5/1C-HH slurry pumps are equivalent to world’s standard HH series slurry pumps.
√ Ductile iron fully lined casing provides durability, strength and long service life.
√ Multi-stage high pressure operation to 750 psi.
√ Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
√ Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
√ Large, open internal passages designed to maximize wear life and lower operating costs.
√ Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life.
√ Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
|Materials||Clear Water Performance||
HH high head slurry pumps widely used for wet crushers, SAG mill discharge, ball mill discharge, rod mill discharge, Ni acid slurry, coarse sand, coarse tailings, phosphate matrix, minerals concentrate, heavy media, dredging, bottom/fly ash, lime grinding, oil sands, mineral sands, fine tailings, phosphoric acid, coal, flotation, sugar beets, process chemical, pulp and paper, FGD, waste water etc.