Payment & Shipping Terms:
|Size::||6" X 4"||Capacity::||162-360m3/h|
|Materials::||A05, A07, A33, A49, A51, A61, R08, R26, R55, U01, U38 Etc||Seal Type::||Expeller Seal, Packing Seal, Mechanical Seal, Double Mechanical|
|Shaft Position From The Horizontal::||Solid Slurry Pump||Warranty::||One Year|
|Application::||Mining,metallurgy, Power Plants, Sewage Water Treatment, Dredging,as Well As Petroleum Industry.||Type:||Horizontal Open Impeller Slurry Pump|
|Model:||8x6E-AH Open Impeller Slurry Pump||Specification:||6 Inch Slurry Pumps|
Tobee® 6/4 E AH Open Impeller Type Slurry Pump Used in Diamond Mining is designed for ultra heavy duty applications such as mill discharge, process plant and tailings, high pressure pipelines, as well as other specialty applications. The material of liner and impeller adopts wear-resistant metal or rubber, discharge branch can be positioned at 8 different positions at intervals of 45 degrees, the pumps may be installed in multistage design, may be driven by belt or direct coupling. The 6x4E-AH slurry pump is widely used in mining/coal mining, hydraulic fracking, mineral processing, steel production, drilling mud, slurry transport, sand and gravel, lime slurry or fly ash.
Size: 6" x 4"
Handling solids: 44mm
Materials: A05, A07, A33, A49, A51, A61, R08, R26, R55, U01 U38 etc
1. Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
2. Liners - Common material hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance.
3. Impeller - Common material hard metal and molded elastomer impellers are completely interchangeable. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
4. Throat bush - Common material hard metal and molded elastomer impellers are completely interchangeable. Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
5. Pump casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
6. One-piece frame - A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
Tobee® 6/4 E AH Open Impeller Type Slurry Pump Used in Diamond Mining Performance Parameters:
Clear Water Performance
Tobee® 6/4 E AH Open Impeller Type Slurry Pump Used in Diamond Mining Structural Design:
Tobee® 6/4 E AH Open Impeller Type Slurry Pump Used in Diamond Mining On-site Applications:
|Wet crushers||Ni acid slurry||Minerals concentrate||Oil sands||Coal||Pulp and paper|
|SAG mill discharge||Coarse sand||Heavy media||Mineral sands||Flotation||FGD|
|Ball mill discharge||Coarse tailings||Dredging||Fine tailings||Sugar beets||Waste water|
|Rod mill discharge||Phosphate matrix||Bottom/fly ash, lime grinding||Phosphoric acid||Process chemical||Aluminum oxide|
Reliable and comprehensive quality assurance system ensures the excellent quality of our products. We have got the “International Standard” certification, manufactured according to GB, Department of superscript, and industry standards, we implement a comprehensive quality management during the entire process of production, accordance with the process file processing strictly, and a variety of detection methods etc.
We have met the requirements of GB3216-89 national Class B accuracy, computer test data monitoring of water test pumping station application. There are physical chemistry laboratory, metallographic analysis room in our factory, for testing material properties in different respects.
1. Quality Policy
Advocates quality is the life of enterprise, assiduous, the pursuit of excellence
2. Quality objectives
qualified products rate 99%, factory qualified pass rate: 100%
3. Quality Commitment
1) We will continue to improve the awareness of quality, implementing as GB/T19001-2000 quality assurance model standard, meeting technical requirements stipulated in the contract. We are not only discharge for the supplier host, but also for the quality of spare parts, external assistance products etc.
2) We promise the delivery time stipulated in the contract.